Hydrotech Pro Series 4 Stage Push Button Monitored Drinking Water System

50 Gallons Per Day

Hydrotech is one of North America's largest suppliers of water treatment equipment. With over 40 years of experience, Hydrotech has been the leader in reverse osmosis drinking water technology; designing state of the art systems for residential and commercial applications.

Premier Push Button Monitored Reverse Osmosis System

Our premier model is equipped with our patented Smartap® Push Buttn Monitor. At the touch of a button you can be assured that you are receiving top quality water or you will be alerted that it is time to change your membrane.

Model 4VTFCC50GPB Features:

• High quality 50 GPD TFC reverse osmosis membrane
• Sediment pre-filtration
• Pre & post carbon block filtration
• Quick connect fittings
• 3/8" tubing from RO tank to faucet for higher flow
• Color coded tubing for ease of installation
• Installation kit
• Air gap chrome faucet
• 4 Gallon steel storage tank

New Features:

• Simple snap fit cover for ease of service
• New slim profile with integrated mounting bracket for easy, space saving installation
• Attractive new design

5 Year Manufacturer's Warranty

Conditions for Use

Source Water Supply Profile

Community/Private             Chlorinated/Non-Chlorinated

Feed Water Pressure1      35- 100 psig (242 - 690 kPa

pH Range                             3.0 - 11.0

Maximum TDS Level            2000 mg/L

Turbidity**                             <1.0 NTU

Maximum SDI***                  <4.0

Chemical Parameters              Max mg/L

Hardness (CaCO3)                    <350 (<20 gpg)

Iron (FE)                                        <0.1

Manganese (Mn)                         <0.05

Hydrogen Sulfide H2S)               0.00

Residual Chlorine (CL2)            <2.0

** Nephelometric Turbidity Unit

*** Silt Density Index: Value Stated in SDI units

Notes: 1 Pressure regulator is recommended for feed water pressures exceeding 80 psig (552 kPa). The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS.  The actual volume of product water rejection percentage will vary with differences from the test conditions that membrane ratings are based upon.  These drinking water systems are not intended to be used for the treatment of water that is microbologically unsafe or of unknown quality.  Storage tank capacity is dependent on pressure,  Example: with a 5 psi precharge, the drawdown volume is 3.2 gal at 60psi, 2.8 gal at 40 psi for the storage tank shown,

Gold Seal Tested and Certified